AUTOOL Car EVAP Smoke Machine Leak Tester, DC12V I193

【Why Need It】: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly. SDT103 Key Features: 【No Air Pump】: Connect shop air supply, connect 12V vehicle power, introduce shop air to the AUTOOL SDT103 fuel leak tester, turn the Flow Dial anti clockwise to open the air flow, switch on the power at the back of the unit, then AUTOOL SDT101 smoke machine automotive will start to generate smoke. 【External Flow Meter】: You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer. 【EVAP Detection】: American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system. 【Wide Testing Range】: The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.universal for all cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. 【Easy To Use & High Efficiency】: AUTOOL SDT103 model is easy to operate. It can help you quickly and accurately find if a failure is caused by a plumbing leak, even the smallest leaks can be detected. Moreover, it can output smoke within a few seconds, significantly improving diagnostic efficiency. 【Visual Flow Meter and Adjustable Knob】: Smoke output flow: up to 10 L/min. The amount of smoke output can be controlled through the flow meter and adjustable knob, which makes it easy to observe and operate. Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage. Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power. Car Sealing Test:Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc. Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system. Turbo Test: The leakage of coolant would cause the engine to report high water temperature. Various Pipe Fittings Test:Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling. Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust. Caution: 1. There is no smoke, no air pressure, and it does not work, which is mostly because there is no air compressor connected for air supply, and an external air compressor is needed to provide air source. 2. Smoke Hose Spray the liquid directly (please reduce the test oil). 3. When connecting the power supply, do not link the wrong clip wire,The clamp wire is divided into positive and negative poles. 4. Add the test oil (preferably Baby oil), and add 10-20 ml each time. 5. Power requirements: DC power supply of 12V, preferably connected to a 12V car battery. How to do leak detection? 1.Fill 10ml-20ml test oil into the smoke leak detector.Disconnect the car pipelines that need to be connected to the smoke leak detector. 2.Connect the adapted quick interface to the automobile pipeline that needs to be tested.Connect an external air supply to the air inlet of the smoke leak detector. 3. Connect the smoke leak detector to the DC12V battery, and the device starts to work.Turn on the smoke switch, and smoke will be generated in about 5 seconds. 4. Connecting to the detected vehicle pipeline will soon be filled with smoke, which is convenient for locating the leak point. Why Choose AUTOOL Official Store? 1. Global Leading Brands ,popular among customers, worth to trust. 2.We are the Only AUTOOL Official Store in Walmart ! 100% original products , best price and Three-year warranty. 3.All products have been passed strict quality test before shipment, make sure high quality. Lifetime Tech Support from AUTOOL Official Store. 4. Support Wholesale Price and Dropshipping.